应用领域与间介/ Brief Introduction：

本生产制造加工线由全自行理瓶机、滚筒机式洗瓶机、灭菌方法常温、干燥机、眼蓝药粉分装旋盖机、卧式标贴冷水机组成，可已完成理瓶、水、气的拆洗、烘烤及三氧进行消毒、分装、加塞、旋盖、标贴等繁琐流程，首要采用眼蓝药粉和他小药量溶剂的联线生产制造加工，也可单人单独适用。齐全可接受性GMP条件。This production line consist of  Automatic Bottle Unscrambler,  Bottle Washing Machine, Tunnel Type Sterilization Drier, eyedrop filling machine, Vertical Labeling machine, can complete bottle sorting, water,and gas cleaning, drying and ozone disinfection, filling, plugging, capping, labeling, mainly used in eyedrops and other small doses of solution, also can be used single independently.　 Meet the GMP requirement.

显著特点/Characteristic：

远程服务器组方案结构设计正确，作业安全、灌装线计算精性强，具国内外同行的产品业专业水准。全合乎GMP的标准。     眼麻醉药分装旋盖机已近我公司的的三四代企业产品，组队页面调节，排泄泵分装，由真空泵吸机械厂手当做液压缸好的打塞，保持了稳定义性和适合率。分为恒转矩旋盖，更具无瓶不分装、无塞不上盖，无瓶无塞可自動关机的用途。    It with reasonable structure, higher precision in filling, reaching the advanced level in domestic same business. Meet with requirement of GMP standard completely.eyedrop filling capping machine is a third generation product, human-machine interface operation, filling by peristaltic pump, replace air cylinder with vacuum drived manipulator for plugging, aquire higherstability and percent of pass. Constant torquecap screwing. No bottle no filling, no plug no capping and automatically stop if cap and plug is under-supply.   

新性能指标表/technical parameters：

适用人群型号/Bottle size	10-20ml
生产的能力素质/Capacity	40-60瓶/分  70-120瓶/分 40-60/  70-120 bottles/min
使用水气压/ Hydraulic Pressure Mpa	0.3Mpa
拿供水量 /water consumption	0.5 m3/h
净化后的缩短空气中负压 /Clean compressed air pressure	0.6-0.8Mpa
无尘减小新鲜空气使用量/Clean compressed air consumption	300 L/min
电源开关/Voltage	380V/50Hz
效率/Power	5.5 kw
产生线总长/Dimension	11000*1500*1900mm